Network Working GroupJ. Slein
Request for Comments: 2291Xerox
Category: InformationalF. Vitali
University of Bologna
E. Whitehead
U.C. Irvine
D. Durand
Boston University
February 1998

Requirements for a Distributed Authoring and Versioning Protocol for the World Wide Web

Status of this Memo

This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited.

Copyright Notice

Copyright © The Internet Society (1998). All Rights Reserved.

Abstract

Current World Wide Web (WWW or Web) standards provide simple support for applications which allow remote editing of typed data. In practice, the existing capabilities of the WWW have proven inadequate to support efficient, scalable remote editing free of overwriting conflicts. This document presents a list of features in the form of requirements for a Web Distributed Authoring and Versioning protocol which, if implemented, would improve the efficiency of common remote editing operations, provide a locking mechanism to prevent overwrite conflicts, improve link management support between non-HTML data types, provide a simple attribute-value metadata facility, provide for the creation and reading of container data types, and integrate versioning into the WWW.


1. Introduction

This document describes functionality which, if incorporated in an extension to the existing HTTP proposed standard [HTTP], would allow tools for remote loading, editing and saving (publishing) of various media types on the WWW to interoperate with any compliant Web server. As much as possible, this functionality is described without suggesting a proposed implementation, since there are many ways to perform the functionality within the WWW framework. It is also possible that a single mechanism could simultaneously satisfy several requirements.

This document reflects the consensus of the WWW Distributed Authoring and Versioning working group (WebDAV) as to the functionality that should be standardized to support distributed authoring and versioning on the Web. As with any set of requirements, practical considerations may make it impossible to satisfy them all. It is the intention of the WebDAV working group to come as close as possible to satisfying them in the specifications that make up the WebDAV protocol.


2. Rationale

Current Web standards contain functionality which enables the editing of Web content at a remote location, without direct access to the storage media via an operating system. This capability is exploited by several existing HTML distributed authoring tools, and by a growing number of mainstream applications (e.g., word processors) which allow users to write (publish) their work to an HTTP server. To date, experience from the HTML authoring tools has shown they are unable to meet their users' needs using the facilities of Web standards. The consequence of this is either postponed introduction of distributed authoring capability, or the addition of nonstandard extensions to the HTTP protocol or other Web standards. These extensions, developed in isolation, are not interoperable.

Other authoring applications have wanted to access document repositories or version control systems through Web gateways, and have been similarly frustrated. Where this access is available at all, it is through nonstandard extensions to HTTP or other standards that force clients to use a different interface for each vendor's service.

This document describes requirements for a set of standard extensions to HTTP that would allow distributed Web authoring tools to provide the functionality their users need by means of the same standard syntax across all compliant servers. The broad categories of functionality that need to be standardized are:


3. Terminology

Where there is overlap, usage is intended to be consistent with that in the HTTP 1.1 specification [HTTP].

Client

Collection

Distributed Authoring Tool

Entity

Hierarchical Collection

Link

Lock

Member of Version Graph

Property

Reservation

Resource

Server

User Agent

Variant

Version Graph

Write Lock


4. General Principles

This section describes a set of general principles that the WebDAV extensions should follow. These principles cut across categories of functionality.

4.1 User Agent Interoperability

All WebDAV clients should be able to work with any WebDAV-compliant HTTP server. It is acceptable for some client/server combinations to provide special features that are not universally available, but the protocol should be sufficient that a basic level of functionality will be universal.

4.2 Client Simplicity

The WebDAV extensions should be designed to allow client implementations to be simple.

4.3 Legacy Client Support

It should be possible to implement a WebDAV-compliant server in such a way that it can interoperate with non-WebDAV clients. Such a server would be able to understand any valid HTTP 1.1 request from an ordinary Web client without WebDAV extensions, and to provide a valid HTTP 1.1 response that does not require the client to understand the extensions.

4.4 Data Format Compatibility

WebDAV-compliant servers should be able to work with existing resources and URIs [URL]. Special additional information should not become a mandatory part of document formats.

4.5 Replicated, Distributed Systems

Distribution and replication are at the heart of the Internet. All WebDAV extensions should be designed to allow for distribution and replication. Version trees should be able to be split across multiple servers. Collections may have members on different servers. Any resource may be cached or replicated for mobile computing or other reasons. Consequently, the WebDAV extensions must be able to operate in a distributed, replicated environment.

4.6 Parsimony in Client-Server Interactions

The WebDAV extensions should keep to a minimum the number of interactions between the client and the server needed to perform common functions. For example, publishing a document to the Web will often mean publishing content together with related properties. A client may often need to find out what version graph a particular resource belongs to, or to find out which resource in a version graph is the published one. The extensions should make it possible to do these things efficiently.

4.7 Changes to HTTP

WebDAV adds a number of new types of objects to the Web: properties, collections, version graphs, etc. Existing HTTP methods such as DELETE and PUT will have to operate in well-defined ways in this expanded environment. WebDAV should explicitly address not only new methods, headers, and MIME types, but also any required changes to the existing HTTP methods and headers.

4.8 Alternate Transport Mechanisms

It may be desirable to transport WebDAV requests and responses by other mechanisms, particularly EMail, in addition to HTTP. The WebDAV protocol specification should not preclude a future body from developing an interoperability specification for disconnected operation via EMail.


5. Requirements

In the requirement descriptions below, the requirement will be stated, followed by its rationale.

5.1 Properties

5.1.1 Functional Requirements

It must be possible to create, modify, read and delete arbitrary properties on resources of any media type.

5.1.2 Rationale

Properties describe resources of any media type. They may include bibliographic information such as author, title, publisher, and subject, constraints on usage, PICS ratings, etc. These properties have many uses, such as supporting searches on property values, enforcing copyrights, and the creation of catalog entries as placeholders for objects which are not available in electronic form, or which will be available later.

5.3 Locking

5.3.1 General Principles

5.3.1.1 Independence of locks

It must be possible to lock a resource without performing an additional retrieval of the resource, and without committing to editing the resource.

5.3.1.2 Multi-Resource Locking

It must be possible to take out a lock on multiple resources residing on the same server in a single action, and this locking operation must be atomic across these resources.

5.3.2 Functional Requirements

5.3.2.1 Write Locks

It must be possible to restrict modification of a resource to a specific person.

5.3.2.2 Lock Query

It must be possible to find out whether a given resource has any active locks, and if so, who holds those locks.

5.3.2.3 Unlock

It must be possible to remove a lock.

5.3.3 Rationale

At present, the Web provides limited support for preventing two or more people from overwriting each other's modifications when they save to a given URI. Furthermore, there is no way to discover whether someone else is currently making modifications to a resource. This is known as the "lost update problem," or the "overwrite problem." Since there can be significant cost associated with discovering and repairing lost modifications, preventing this problem is crucial for supporting distributed authoring. A write lock ensures that only one person may modify a resource, preventing overwrites. Furthermore, locking support is a key component of many versioning schemes, a desirable capability for distributed authoring.

An author may wish to lock an entire web of resources even though he is editing just a single resource, to keep the other resources from changing. In this way, an author can ensure that if a local hypertext web is consistent in his distributed authoring tool, it will then be consistent when he writes it to the server. Because of this, it should be possible to take out a lock without also causing transmission of the contents of a resource.

It is often necessary to guarantee that a lock or unlock operation occurs at the same time across multiple resources, a feature which is supported by the multiple-resource locking requirement. This is useful for preventing a collision between two people trying to establish locks on the same set of resources, since with multi- resource locking, one of the two people will get a lock. If this same multiple-resource locking scenario was repeated by using atomic lock operations iterated across the resources, the result would be a splitting of the locks between the two people, based on resource ordering and race conditions.

5.4 Reservations

5.4.1 Functional Requirements

5.4.1.1 Reserve

It must be possible for a principal to register with the server an intent to edit a given resource, so that other principals can discover who intends to edit the resource.

5.4.1.2 Reservation Query

It must be possible to find out whether a given resource has any active reservations, and if so, who currently holds reservations.

5.4.1.3 Release Reservation

It must be possible to release the reservation.

5.4.2 Rationale

Experience from configuration management systems has shown that people need to know when they are about to enter a parallel editing situation. Once notified, they either decide not to edit in parallel with the other authors, or they use out-of-band communication (face- to-face, telephone, etc.) to coordinate their editing to minimize the difficulty of merging their results. Reservations are separate from locking, since a write lock does not necessarily imply a resource will be edited, and a reservation does not carry with it any access restrictions. This capability supports versioning, since a check-out typically involves taking out a write lock, making a reservation, and getting the resource to be edited.

5.5 Retrieval of Unprocessed Source for Editing

5.5.1 Functional Requirement

The source of any given resource must be retrievable by any principal with authorization to edit the resource.

5.5.2 Rationale

There are many cases where the source stored on a server does not correspond to the actual entity transmitted in response to an HTTP GET. Current known cases are server side include directives, and Standard Generalized Markup Language (SGML) source which is converted on the fly to HyperText Markup Language (HTML) [HTML] output entities. There are many possible cases, such as automatic conversion of bitmap images into several variant bitmap media types (e.g. GIF, JPEG), and automatic conversion of an application's native media type into HTML. As an example of this last case, a word processor could store its native media type on a server which automatically converts it to HTML. A GET of this resource would retrieve the HTML. Retrieving the source would retrieve the word processor native format.

5.6 Partial Write

5.6.1 Functional Requirement

After editing a resource, it must be possible to write only the changes to the resource, rather than retransmitting the entire resource.

5.6.2 Rationale

During distributed editing which occurs over wide geographic separations and/or over low bandwidth connections, it is extremely inefficient and frustrating to rewrite a large resource after minor changes, such as a one-character spelling correction. Support is needed for transmitting "insert" (e.g., add this sentence in the middle of a document) and "delete" (e.g. remove this paragraph from the middle of a document) style updates. Support for partial resource updates will make small edits more efficient, and allow distributed authoring tools to scale up for editing large documents.

5.7 Name Space Manipulation

5.7.1 Copy

5.7.1.1 Functional Requirements

It must be possible to duplicate a resource without a client loading, then resaving the resource. After the copy operation, a modification to either resource must not cause a modification to the other.

5.7.1.2 Rationale

There are many reasons why a resource might need to be duplicated, such as changing ownership, preparing for major modifications, or making a backup. Due to network costs associated with loading and saving a resource, it is far preferable to have a server perform a resource copy than a client.

5.7.2 Move/Rename

5.7.2.1 Functional Requirements

It must be possible to change the location of a resource without a client loading, then resaving the resource under a different name. After the move operation, it must no longer be possible to access the resource at its original location.

5.7.2.2 Rationale

It is often necessary to change the name of a resource, for example due to adoption of a new naming convention, or if a typing error was made entering the name originally. Due to network costs, it is undesirable to perform this operation by loading, then resaving the resource, followed by a delete of the old resource. Similarly, a single rename operation is more efficient than a copy followed by a delete operation. Note that moving a resource is considered the same function as renaming a resource.

5.8 Collections

A collection is a resource that is a container for other resources, including other collections. A resource may belong to a collection either directly or by reference. If a resource belongs to a collection directly, name space operations like copy, move, and delete applied to the collection also apply to the resource. If a resource belongs to a collection by reference, name space operations applied to the collection affect only the reference, not the resource itself.

5.8.1 Functional Requirements

5.8.1.1 List Collection

A listing of all resources in a specific collection must be accessible.

5.8.1.2 Make Collection

It must be possible to create a new collection.

5.8.1.3 Add to Collection

It must be possible to add a resource to a collection directly or by reference.

5.8.1.4 Remove from Collection

It must be possible to remove a resource from a collection.

5.8.2 Rationale

In [URL] it states that, "some URL schemes (such as the ftp, http, and file schemes) contain names that can be considered hierarchical." Especially for HTTP servers which directly map all or part of their URL name space into a filesystem, it is very useful to get a listing of all resources located at a particular hierarchy level. This functionality supports "Save As..." dialog boxes, which provide a listing of the entities at a current hierarchy level, and allow navigation through the hierarchy. It also supports the creation of graphical visualizations (typically as a network) of the hypertext structure among the entities at a hierarchy level, or set of levels. It also supports a tree visualization of the entities and their hierarchy levels.

In addition, document management systems may want to make their documents accessible through the Web. They typically allow the organization of documents into collections, and so also want their users to be able to view the collection hierarchy through the Web.

There are many instances where there is not a strong correlation between a URL hierarchy level and the notion of a collection. One example is a server in which the URL hierarchy level maps to a computational process which performs some resolution on the name. In this case, the contents of the URL hierarchy level can vary depending on the input to the computation, and the number of resources accessible via the computation can be very large. It does not make sense to implement a directory feature for such a name space. However, the utility of listing the contents of those URL hierarchy levels which do correspond to collections, such as the large number of HTTP servers which map their name space to a filesystem, argue for the inclusion of this capability, despite not being meaningful in all cases. If listing the contents of a URL hierarchy level does not makes sense for a particular URL, then a "405 Method Not Allowed" status code could be issued.

The ability to create collections to hold related resources supports management of a name space by packaging its members into small, related clusters. The utility of this capability is demonstrated by the broad implementation of directories in recent operating systems. The ability to create a collection also supports the creation of "Save As..." dialog boxes with "New Level/Folder/Directory" capability, common in many applications.

5.9 Versioning

5.9.1 Background and General Principles

5.9.1.1 Stability of versions

Most versioning systems are intended to provide an accurate record of the history of evolution of a document. This accuracy is ensured by the fact that a version eventually becomes "frozen" and immutable. Once a version is frozen, further changes will create new versions rather than modifying the original. In order for caching and persistent references to be properly maintained, a client must be able to determine that a version has been frozen. Any successful attempt to retrieve a frozen version of a resource will always retrieve exactly the same content, or return an error if that version (or the resource itself) is no longer available.

5.9.1.2 Operations for Creating New Versions

Version management systems vary greatly in the operations they require, the order of the operations, and how they are combined into atomic functions. In the most complete cases, the logical operations involved are:

  • Reserve existing version
  • Lock existing version
  • Retrieve existing version
  • Request or suggest identifier for new version
  • Write new version
  • Release lock
  • Release reservation

With the exception of requesting a new version identifier, all of these operations have applications outside of versioning and are either already part of HTTP or are discussed in earlier sections of these requirements. Typically, versioning systems combine reservation, locking, and retrieval -- or some subset of these -- into an atomic checkout function. They combine writing, releasing the lock, and releasing the reservation -- or some subset of these -- into an atomic checkin function. The new version identifier may be assigned either at checkout or at checkin.

The WebDAV extensions must find some balance between allowing versioning servers to adopt whatever policies they wish with regard to these operations and enforcing enough uniformity to keep client implementations simple.

5.9.1.3 The Versioning Model

Each version typically stands in a "derived from" relationship to its predecessor(s). It is possible to derive several different versions from a single version (branching), and to derive a single version from several versions (merging). Consequently, the collection of related versions forms a directed acyclic graph. In the following discussion, this graph will be called a "version graph". Each node of this graph is a "version" or "member of the version graph". The arcs of the graph capture the "derived from" relationships.

It is also possible for a single resource to participate in multiple version graphs.

The WebDAV extensions should support this versioning model, though particular servers may restrict it in various ways.

5.9.1.4 Versioning Policies

Many writers, including Feiler [CM] and Haake and Hicks [VSE], have discussed the notion of versioning styles (referred to here as versioning policies, to reflect the nature of client/server interaction) as one way to think about the different policies that versioning systems implement. Versioning policies include decisions on the shape of version histories (linear or branched), the granularity of change tracking, locking requirements made by a server, etc. The protocol should clearly identify the policies that it dictates and the policies that are left up to versioning system implementors or administrators.

5.9.1.5 

It is possible to version resources of any media type.

5.9.2 Functional Requirements

5.9.2.1 Referring to a version graph

There must be a way to refer to a version graph as a whole.

Some queries and operations apply, not to any one member of a version graph, but to the version graph as a whole. For example, a client may request that an entire graph be moved, or may ask for a version history. In these cases, a way to refer to the whole version graph is required.

5.9.2.2 Referring to a specific member of a version graph

There must be a way to refer to each member of a version graph. This means that each member of the graph is itself a resource.

Each member of a version graph must be a resource if it is to be possible for a hypertext link to refer to specific version of a page, or for a client to request a specific version of a document for editing.

5.9.2.3 

A client must be able to determine whether a resource is a version graph, or whether a resource is itself a member of a version graph.

A resource may be a simple, non-versioned resource, or it may be a version graph, or it may be a member of a version graph. A client needs to be able to tell which sort of resource it is accessing.

5.9.2.4 

There must be a way to refer to a server-defined default member of a version graph.

The server should return a default version of a resource for requests that ask for the default version, as well as for requests where no specific version information is provided. This is one of the simplest ways to guarantee non-versioning client compatibility. This does not rule out the possibility of a server returning an error when no sensible default exists.

It may also be desirable to be able to refer to other special members of a version graph. For example, there may be a current version for editing that is different from the default version. For a graph with several branches, it may be useful to be able to request the tip version of any branch.

5.9.2.5 

It must be possible, given a reference to a member of a version graph, to find out which version graph(s) that resource belongs to.

This makes it possible to understand the versioning context of the resource. It makes it possible to retrieve a version history for the graphs to which it belongs, and to browse the version graph. It also supports some comparison operations: It makes it possible to determine whether two references designate members of the same version graph.

5.9.2.6 Navigation of a version graph

Given a reference to a member of a version graph, it must be possible to discover and access the following related members of the version graph.

  • root member of the graph
  • predecessor member(s)
  • successor member(s)
  • default member of the graph

It must be possible in some way for a versioning client to access versions related to a resource currently being examined.

5.9.2.7 Version Topology

There must be a way to retrieve the complete version topology for a version graph, including information about all members of the version graph. The format for this information must be standardized so that the basic information can be used by all clients. Other specialized formats should be accommodated, for servers and clients that require information that cannot be included in the standard topology.

5.9.2.8 

A client must be able to propose a version identifier to be used for a new member of a version graph. The server may refuse to use the client's suggested version identifier. The server should tell the client what version identifier it has assigned to the new member of the version graph.

5.9.2.9 

A version identifier must be unique across a version graph.

5.9.2.10 

A client must be able to supply version-specific properties to be associated with a new member of a version graph. (See Section 5.1 "Properties" above.) At a minimum, it must be possible to associate comments with the new member, explaining what changes were made.

5.9.2.11 

A client must be able to query the server for information about a version tree, including which versions are locked, which are reserved for editing, and by whom (Session Tracking).

5.9.3 Rationale

Versioning in the context of the world-wide web offers a variety of benefits:

It provides infrastructure for efficient and controlled management of large evolving web sites. Modern configuration management systems are built on some form of repository that can track the revision history of individual resources, and provide the higher-level tools to manage those saved versions. Basic versioning capabilities are required to support such systems.

It allows parallel development and update of single resources. Since versioning systems register change by creating new objects, they enable simultaneous write access by allowing the creation of variant versions. Many also provide merge support to ease the reverse operation.

It provides a framework for coordinating changes to resources. While specifics vary, most systems provide some method of controlling or tracking access to enable collaborative resource development.

It allows browsing through past and alternative versions of a resource. Frequently the modification and authorship history of a resource is critical information in itself.

It provides stable names that can support externally stored links for annotation and link-server support. Both annotation and link servers frequently need to store stable references to portions of resources that are not under their direct control. By providing stable states of resources, version control systems allow not only stable pointers into those resources, but also well-defined methods to determine the relationships of those states of a resource.

It allows explicit semantic representation of single resources with multiple states. A versioning system directly represents the fact that a resource has an explicit history, and a persistent identity across the various states it has had during the course of that history.

5.10 Variants

Detailed requirements for variants will be developed in a separate document.

5.10.1 Functional Requirements

It must be possible to send variants to the server, describing the relationships between the variants and their parent resource. In addition, it must be possible to write and retrieve variants of property labels, property descriptions, and property values.

5.10.2 Rationale

The HTTP working group is addressing problems of content negotiation and retrieval of variants of a resource. To extend this work to an authoring environment, WEBDAV must standardize mechanisms for authors to use when submitting variants to a server. Authors need to be able to provide variants in different file or document formats, for different uses. They need to provide variants optimized for different clients and for different output devices. They need to be able to provide variants in different languages in the international environment of the Web. In support of internationalization requirements (See 5.12 below), variants need to be supported not just for the content of resources, but for any information intended for human use, such as property values, labels, and descriptions.

5.11 Security

5.11.1 Authentication

The WebDAV specification should state how the WebDAV extensions interoperate with existing authentication schemes, and should make recommendations for using those schemes.

5.11.2 Access Control

Access control requirements are specified in a separate access control work in progress [AC].

5.11.3 Interoperability with Security Protocols

The WebDAV specification must provide a minimal list of security protocols which any compliant server / client must support. These protocols should insure the authenticity of messages and the privacy and integrity of messages in transit.

5.12 Internationalization

5.12.1 Character Sets and Languages

Since Web distributed authoring occurs in a multi-lingual environment, information intended for user comprehension must conform to the IETF Character Set Policy [CHAR]. This policy addresses character sets and encodings, and language tagging.

5.12.2 Rationale

In the international environment of the Internet, it is important to insure that any information intended for user comprehension can be displayed in a writing system and language agreeable to both the client and the server. The information encompassed by this requirement includes not only the content of resources, but also such things as display names and descriptions of properties, property values, and status messages.


6. Acknowledgements

Our understanding of these issues has emerged as the result of much thoughtful discussion, email, and assistance by many people, who deserve recognition for their effort.

7. References

[AC]
Radoff, J., “Requirements for Access Control within Distributed Authoring and Versioning Environments on the World Wide Web”.
Unpublished manuscript, <http://lists.w3.org/Archives/Public/w3c-dist-auth/1997AprJun/0183.html>.
[CHAR]
Alvestrand, H., “IETF Policy on Character Sets and Languages”, BCP 18, RFC 2277, January 1998.
[CM]
Feiler, P., “Configuration Management Models in Commercial Environments”, Software Engineering Institute Technical Report CMU/SEI-91-TR-7, <http://www.sei.cmu.edu/products/publications/91.reports/91.tr.007.html>.
[HTML]
Berners-Lee, T. and D. Connolly, “Hypertext Markup Language - 2.0”, RFC 1866, November 1995.
[HTTP]
Fielding, R., Gettys, J., Mogul, J., Frystyk, H., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1”, RFC 2068, January 1997.
[ISO-10646]
International Organization for Standardization, “Information Technology - Universal Multiple-octet coded Character Set (UCS) - Part 1: Architecture and Basic Multilingual Plane”, ISO Standard 10646-1, May 1993.
[URL]
Berners-Lee, T., Masinter, L., and M. McCahill, “Uniform Resource Locators (URL)”, RFC 1738, December 1994.
[VSE]
Haake, A. and D. Hicks, “VerSE: Towards Hypertext Versioning Styles”.
Proc. Hypertext'96, The Seventh ACM Conference on Hypertext, 1996, pages 224-234.

Authors' Addresses

J. Slein
Xerox Corporation
800 Phillips Road 128-29E
Webster, NY 14580
EMail: slein@wrc.xerox.com
Fabio Vitali
Department of Computer Science, University of Bologna
EMail: fabio@cs.unibo.it
E. J. Whitehead, Jr.
Dept. Of Information and Computer Science, University of California, Irvine
Irvine, CA 92697-3425
Fax: 714-824-4056
EMail: ejw@ics.uci.edu
David G. Durand
Department of Computer Science, Boston University
Boston, MA 
EMail: dgd@cs.bu.edu

Full Copyright Statement

Copyright © The Internet Society (1998). All Rights Reserved.

This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.

The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.

This document and the information contained herein is provided on an “AS IS” basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

The IETF takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on the IETF's procedures with respect to rights in standards-track and standards-related documentation can be found in BCP-11. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementors or users of this specification can be obtained from the IETF Secretariat.

The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights which may cover technology that may be required to practice this standard. Please address the information to the IETF Executive Director.